Office server on a separate PC, invitations and data move
The “This is the office server” mode on a separate Windows computer, invitations for employee PCs, and moving data between the administrator’s PC and the server.
By default the Lanorix server runs on the administrator’s computer. If that computer is often switched off, or you want the data on a separate machine, set aside an always-on Windows computer and choose the “This is the office server” mode (“Это сервер офиса”) on it. Then connect employees to it, most simply with an invitation, and move your existing data over if you wish.
The Lanorix app may show its interface in Russian. Where it helps, the original Russian label is given in parentheses.
Office server on a separate Windows PC
- Choose a computer that is always on and has a fixed address on the network (reserve its IP in the router, “DHCP reservation”). Only you should have access to it.
- Install
Lanorix-Setup-0.18.1.exe. Windows SmartScreen may show a warning because the installer is not code-signed yet. Check the SHA-256 against the website, then click “More info” → “Run anyway”. - On the first screen click “This is the office server” (“A separate computer that will store the data. The administrator console is not needed here”).
- If Windows asks about network access, allow it for private networks (the ports 8787/tcp and 8788/udp are needed, see “Troubleshooting”).
- The “Office server” (“Сервер офиса”) window opens. It shows the admin code once: write it down and click “I saved the code” (“Я сохранил(а) код”).
The “Office server” window
- Status: “Server is running”, “Starting…” or “Server stopped”.
- “How to connect”: name, addresses, how many computers are online (and how many wait for approval), the certificate fingerprint. Buttons: copy address, copy fingerprint.
- “Invite employees”: creating invitations (see below).
- “Admin code”: the “Issue a new code” button; the old code stops working and the new one is shown once.
- “Server operation”: Start, Stop and “Run without Windows sign-in…”. Without that setting the server runs while the Lanorix app is open; with it, it starts with the computer as a Windows task even when nobody is signed in (the button becomes “Turn off running without sign-in…”). Turn it on for a server that must always be available.
- “Change this computer’s mode”: go back to the mode choice. The server stops (unless “run without sign-in” is on); data is kept.
Closing the window only hides it; the server keeps running. To open it again use the Lanorix tray icon → “Open server window”. The tray menu also has “Invite an employee…” and “Change mode…”.
How the administrator connects
On your own computer, start Lanorix and click “Other options” → the “Administrator” tab → “Admin code”, then enter the server address (for example 192.168.1.20:8787) and the code. On first connection the app remembers the certificate fingerprint: compare it with the one in the “Office server” window. If a “Server certificate changed” window appears later and you did not reinstall the server, do not connect: it may be a substitution.
Connecting employees
There are two ways:
- Automatic discovery. Choose “Employee computer” on the employee’s PC: the app finds the server itself (UDP broadcast, port 8788) and you click “Accept”. This works only within one subnet.
- An invitation, for PCs in another subnet, on guest Wi-Fi, or for quick mass setup. The employee pastes a string and the computer connects by itself, without discovery and without your approval.
Invitations for employees
Do not confuse this with inviting administrators to the company in the website dashboard: that invitation gives a colleague access to the dashboard, while this one connects a computer to the server.
Create an invitation
- Open the invitations window in one of three ways: “Settings” → “Backups and server” (“Копии и сервер”) → “Invite employees…”; the tray icon on the administrator’s PC → “Invite an employee…”; the “Invite employees” block in the “Office server” window.
- Pick a validity period in “Valid for”: 1 hour, 1 day (default), 7 days or 30 days.
- Tick “Reusable, for several computers” if the invitation is meant for several PCs (up to 50). Without it the invitation works for one computer.
- Optionally say who it is for (“Accounting”); the label is visible only to you.
- Click “Create invitation”. A string like
LNX1.…appears. Click “Copy” or “Save to file…” (a.lanorix-invitefile).
Paste the invitation on the employee’s PC
- Install Lanorix on the employee’s PC.
- On the first screen click the “Connect by invitation” link (“Подключиться по приглашению”).
- Paste the
LNX1.…string into the field, or click “Open file…” and choose the invitation file. The server name, address and expiry appear under the field. - Click “Connect”. The computer connects without searching for the server and without your approval.
If an invitation was issued without auto-approval, the line under the field says administrator confirmation is required; then click “Accept” in the console. An administrator who has the admin code can paste an invitation the same way and tick “Sign in as administrator”.
Revoke an invitation
In the invitations window the “Active invitations” list shows the label, expiry, type (“one” / “many”) and the number of connected PCs. “Revoke” (“Отозвать”) invalidates the invitation immediately; computers that are already connected stay connected. Revoke an invitation if the string ended up in the wrong hands.
Limits
- Validity is from 1 hour to 30 days. Expired and revoked invitations are hidden from the list.
- A one-time invitation is bound to the first PC; a reusable one to up to 50 different PCs. Up to 200 invitations are kept at a time.
- The invitation embeds the server’s local network addresses and its certificate fingerprint. If the server’s IP address changes, create a new invitation.
The invitation does not work
- “Invitation has expired. Ask the administrator for a new one”: create a new one with a suitable validity (for example 7 days) and send it to the employee.
- “This is not a Lanorix invitation” or “The invitation is damaged”: the string was copied incompletely; copy all of it, starting with
LNX1., or send it as a file. - “Unknown invitation version: update Lanorix”: the employee’s PC has an old app version.
- The invitation was revoked or all its places are used (50 PCs for a reusable one, one for a one-time one): create a new one.
- The computer cannot connect: check the network and ports, see “Troubleshooting”.
Moving data between the administrator’s PC and the server
If you started with the built-in server on your own computer and later set up an office server (or the other way round), you can move all data: computers, zones, requests, passwords, the log and the equipment register. Only the company owner can move data. The command: “Settings” → “Backups and server” → “Move data…” (“Перенести данные…”) or the tray icon → “Data move…”. The data size limit is 1 GB.
From the administrator’s PC to the office server
- Prepare the office server (see above) and note its address, admin code and fingerprint from the “Office server” window.
- On the administrator’s PC open “Data move…”. In the “Move data to the office server” window enter the server address (for example
192.168.1.20:8787) or paste anLNX1.…invitation and click “Check server”. - Compare the certificate fingerprint on screen with the one in the “Office server” window. If it differs, stop.
- Enter the office server’s admin code. If the target server already has data, tick “The target server already has data: replace it” (the server’s previous data will be replaced).
- Click “Move data” and confirm. The window shows the stages: checking the server, an encrypted copy, upload, verification, applying (the server restarts), notifying PCs.
Until the office server confirms the move, everything keeps working in the old place, and on any error nothing changes. After success: employee PCs get the new address and switch by themselves; your console connects to the new server; the old server’s data stays on your computer in %APPDATA%\Lanorix\server-moved-… as a backup. The office server uses the previous server’s certificate, so the fingerprint stays the same. The office server’s admin code remains the one you typed.
Computers that were switched off during the move connect when they are turned on and find the server. If one cannot find it (another subnet), connect it with an invitation.
From the office server to the administrator’s PC
If your console is connected to a separate server, “Data move…” offers “Move data to this computer”: the data is copied to your computer, it becomes the server, and employee PCs switch to it by themselves. The old server keeps running and keeps its data as a backup; switch it off after the move. If this computer already had built-in server data, it is kept in a separate server-old-… folder.
Troubleshooting
- Firewall. On the server computer, 8787/tcp (connections) and 8788/udp (employee discovery) must be open. On first start allow Lanorix on private networks; later use “Windows Defender Firewall” → “Allow an app…” → Lanorix → “Private”. Invitations and data moves use port 8787.
- Automatic discovery does not find the server. It only works within one subnet. For another subnet, guest Wi-Fi or VPN use an invitation, or “Other options” with the server address (port 8787).
- SmartScreen. The installer is not digitally signed yet, so Windows shows “Windows protected your PC”. Check the SHA-256 and click “More info” → “Run anyway”.
- The window says “Server stopped” or shows an error. Click Start; details are in the server log (
server.login%APPDATA%\Lanorix\server). If Start is disabled, the server runs as a Windows task. - Admin code lost. “Office server” window → “Admin code” → “Issue a new code”.
- The server address changed. Reserve the IP for the computer in the router. PCs connected by an invitation must be connected again with a new one.
For anything else see “Common problems” or contact support.