LANorixCloud

Home / Help / Guides

Lanorix app guide

How to install the app, sign in and work in it: for employees, the chat, resources and files; for administrators, every section of the console.

There is one Lanorix app for everyone: the same installer, Lanorix-Setup-0.18.1.exe, is used for the administrator and for employees, and the mode is chosen on first start. On the administrator’s computer the Lanorix server is built into the app, and employee computers find it on the office network by themselves. So install the app on the administrator’s computer first, then on the employees’ computers.

The Lanorix app may show its interface in Russian. Where it helps, the original Russian label is given in parentheses.

1. Installation

  1. Download the installer from the “Download” section on the home page and check its SHA-256 checksum in PowerShell: Get-FileHash file_name. If the checksum does not match, do not run the file.
  2. Run Lanorix-Setup-0.18.1.exe. The app is installed for the current Windows user; administrator rights are not required. You can choose the folder; a Lanorix shortcut appears on the desktop and in the Start menu.
  3. The installer is not signed yet, so Windows SmartScreen may show a warning: click “More info” → “Run anyway”, but only after you have checked the checksum.
  4. For mass deployment to employee PCs there is a silent mode with no windows: Lanorix-Setup-0.18.1.exe /S. After that, the “Employee computer” mode is chosen once on each PC.

Requirements: Windows 10 or 11; employee computers on the same network as the administrator’s computer (usually the same office). The app starts with Windows and lives in the system tray (the notification area at the bottom right).

2. First start: choosing the mode

On first start, the app asks what kind of computer it is.

“This is the administrator’s computer” (“Это компьютер администратора”)

The built-in Lanorix server starts on this computer, and the console signs in automatically; no admin code is needed. The server starts on its own with Windows (without a window). If Windows asks whether to allow network access, allow it (private networks); otherwise employee computers will not find the server. Choose a computer that is usually on: while it is off, employees cannot use the chat and the console cannot see them. More in the server guide.

“Employee computer” (“Компьютер сотрудника”)

The app finds the server on the office network (on the same subnet) by itself and shows “Waiting for the administrator to approve this computer” (“Ждём, когда администратор подтвердит этот компьютер”). The administrator clicks “Accept” (“Принять”) on the console’s Home page (or in the setup wizard), and the computer is connected. There is nothing to type, and later starts sign in automatically. More in “Connecting employee computers”.

“This is the office server” (“Это сервер офиса”)

For a separate Windows computer that only stores data: the administrator console is not needed there, and an “Office server” window opens with the admin code and the address. More in “Office server on a separate PC, invitations and data move”.

“Connect by invitation” (“Подключиться по приглашению”)

A link under the mode buttons. The employee pastes the LNX1.… string created by the administrator (“Settings” → “Backups and server” → “Invite employees…”) and the computer connects without searching for the server and without approval, which is handy for another subnet and for mass setup. If the invitation has expired, the administrator issues a new one: see invitations.

“Other options” (“Другие варианты”): manual sign-in

The previous sign-in window with two tabs: for PCs on another subnet or on guest Wi-Fi, for a dedicated server and for signing in with a company account.

Employee

  • Server address (“Адрес сервера”): for example, 192.168.1.10:8787 or wss://lanorix.example.ru. The administrator gives it to you.
  • Group login and password: shared by a group of computers (for example, “Accounting”). The administrator creates them under “Computers” → “Groups and sign-in” (“Группы и входы”).
  • External server address (optional): for working from home, if the administrator has enabled access from the internet.
  • “Remember and sign in automatically” (“Запомнить и входить автоматически”): the app reconnects on its own after a restart.

Administrator

  • Company account: the email and password of your account on lanorix.su (works when the server is connected to the cloud). If the account has several companies, the app asks you to choose one. If two-factor authentication is on, enter the six-digit code from your authenticator app or a backup code after the password.
  • Admin code: the code the server creates on its first start. For the built-in server it is saved in %APPDATA%\Lanorix\server\admin-code.txt on the administrator’s computer; a dedicated server shows it once in its window.

Secure connection

By default, the app connects only to a secure wss:// address. If your server runs on the local network without a certificate, check “Allow unencrypted connection on the local network only” (“Разрешить незашифрованное подключение только в локальной сети”). It is allowed only for private addresses (192.168.x.x, 10.x.x.x and so on); the password then travels over the network unencrypted, so saving sign-in details is disabled. The app will not accept an external unencrypted address.

3. Working as an employee

After sign-in, the app minimizes to the tray, and a small chat icon appears at the bottom right of the screen. You can drag it, and it does not take focus from other windows. The tray icon menu:

  • Message the administrator (“Написать администратору”): opens the chat. The employee writes a request, and the administrator replies from the console. When a reply arrives, Windows shows a notification and a red dot appears on the icon.
  • My resources (“Мои ресурсы”): servers, shared folders and RDP access that the administrator has granted to the employee. If a resource is missing, click “Request access” (“Запросить доступ”) and give a reason; the request goes to the administrator.
  • Files (“Файлы”): shared folders the employee has access to. You can download, upload, create a folder, rename, delete, open a file for editing and save it back to the server. Files go through the Lanorix server on your network.
  • Connection settings… (“Настройки подключения…”): opens the sign-in window to change the server or group.
  • Close Lanorix (“Закрыть Lanorix”): quits the app completely.

4. Screen viewing and remote control

The administrator can view an employee’s PC screen to help out. This cannot be done covertly:

  • when the administrator connects, Windows shows the notification “The administrator has connected to your screen” (“Администратор подключился к вашему экрану”), and the chat icon marks the active session;
  • if “ask for permission” is enabled for the PC, the employee sees the question “The administrator wants to view your screen” and chooses “Allow” (“Разрешить”) or “Decline” (“Отклонить”); no answer within 30 seconds means decline;
  • mouse and keyboard control is requested separately. While it is active, the tray menu has a “Stop remote control” item (“Отключить управление”), so the employee can end it at any time;
  • the start and end of each session are written to the log on the PC and to the console action log.

5. Administrator console

After an administrator signs in, the console opens. On the left is a menu of five sections: Home, Computers, Requests, Access and files, Settings (“Главная”, “Компьютеры”, “Обращения”, “Доступы и файлы”, “Настройки”); “Computers”, “Access and files” and “Settings” have sub-tabs along the top. Red counters in the menu show where something is waiting for your decision. At the bottom of the menu are the subscription status, the server connection indicator, the name of the signed-in user and the “Subscription and cloud” (“Подписка и облако”) and “Sign out” (“Выйти”) buttons.

Home is where work starts. At the top is a summary: computers online, requests without a reply, problems and PCs waiting to connect. Below is the “To do” list (“Нужно сделать”); every item has its own button, so you usually don’t need to go anywhere else:

  • “New computer … asks to connect” — “Accept” or “Decline” (“Принять” / “Отклонить”);
  • an employee message — “Reply” (“Ответить”) opens the conversation;
  • “PC-BUH-01: 8% left on drive C”, CPU or memory above the threshold — “Open” (“Открыть”) shows the PC card;
  • a printer or router not responding, access requests, a subscription that is ending;
  • reminders “Connect employee computers” and “Turn on command protection” if that hasn’t been done yet.

When nothing needs attention, Home says so: “All good” (“Всё в порядке”).

The setup wizard (“Мастер настройки”) opens by itself on first start, while no computers are connected, and walks you through: the server is running → connect computers (instructions, a link to the installer and a list of new PCs with an “Accept” button) → command protection (key password) → done. Any step can be skipped; to open the wizard again, use the “Setup wizard” button on Home.

Search: press Ctrl+K (or “Search” in the menu) and start typing a section or computer name — “requests”, “passwords”, “PC-BUH”. Enter opens the selected item.

The tray icon menu on the administrator’s computer offers “Open console” (“Открыть консоль”), this PC’s address (employees on another subnet enter it under “Other options”), “Server log” (“Журнал сервера”), “Invite an employee…” (“Пригласить сотрудника…”), “Data move…” (“Перенос данных…”, see office server) and “Change mode…” (“Сменить режим…”). The console also opens in a browser at the server address, for example http://192.168.1.10:8787/; this sign-in requires the admin code.

6. Console sections

Section → sub-tabWhat to do there
Home (“Главная”)The summary and the “To do” list with action buttons (see above). The “Setup wizard” button.
Computers → List (“Компьютеры” → “Список”)All PCs: name, group, user, IP, CPU and memory load, last seen online. Search and filters by group and department. Click a PC to open a card on the right with system information and actions, including screen viewing. When a new employee computer looks for the server, a banner “New computer: … — Accept / Decline” appears at the top.
Computers → Monitoring (“Мониторинг”)Thresholds for CPU load, memory and free disk space (on from the start, with standard values). Breaches go to the event feed and to Home; below is a summary for the whole fleet.
Computers → Traffic (“Трафик”)Network speed and volume per computer; limiting speed or turning off internet access on a PC.
Computers → Groups and sign-in (“Группы и входы”)New PCs go to the group “All computers” (“Все компьютеры”) by themselves — usually nothing else is needed. A separate group with a login and password (at least 6 characters) is useful when employees connect manually or from the internet. The “PC connection and internet access…” button (“Подключение ПК и доступ из интернета…”) controls password-less joining and signing in from outside (see the server guide).
Computers → Departments (“Отделы”)Grouping of PCs and equipment for convenience (“HR”: PC-213, a printer). A PC or device can belong to only one department.
Computers → Equipment (“Техника”)A register of all company equipment: inventory number, serial numbers, department, employee, location, warranty, status, history and CSV import/export. PCs with the app appear by themselves; a PC card has the “Company inventory no.” and “Hardware” blocks. See “Equipment register”.
Requests (“Обращения”)Employee messages from the chat. Select a request, write a reply and click “Reply” (“Ответить”); for a resolved request, click “Close” (“Закрыть”).
Access and files → Server access (“Доступы к серверам”)Resources that employees see in “My resources”: a document server, RDP, a shared folder. Each has its own permissions and expiry date. Employee access requests are handled here too, and you can remotely set up an SMB shared folder or RDP on a Windows PC (“Show what will be done” → “Run”).
Access and files → Shared folders (“Общие папки”)Shared folders on employee PCs: “+ Shared folder”, the path on the PC, the file size limit and who it is open to. Below is a file browser for the selected folder: upload, create a folder, download.
Access and files → Passwords (“Пароли”)Logins, passwords and keys encrypted with a master password (at least 10 characters) on the administrator’s side; the server sees only ciphertext. The vault locks itself after a period of inactivity. The master password cannot be recovered: if you forget it, the data will be lost.
Settings → Command protection (“Защита команд”)Once the keys are created, PCs run commands only if they are signed with the administrator’s key, so a compromised server or cloud cannot be used to run code on the computers. Create the keys (easiest in the setup wizard); to sign actions, the key is unlocked with the password for a limited time. The key password cannot be recovered, so write it down. The same tab has the “Network encryption” panel (“Шифрование в сети”, since 0.12): traffic between the computers and the server is encrypted; the panel shows the server certificate fingerprint and how many PCs still connect without encryption (they are tagged “без шифрования” in the list — update Lanorix on them). Once all are updated, turn on “Encrypted connections only”. If the app on a PC says the server certificate has changed and you did not reinstall the server, do not confirm — compare the fingerprint with this panel. Below is the “Updates” panel (“Обновления”, since 0.13): the app checks lanorix.su for new versions itself and installs only updates signed by Lanorix. Employee computers update automatically (the owner can turn this off); on the administrator’s computer the update is installed with the “Install … and restart” button — the server restarts for about 30 seconds. Each PC card shows its Lanorix version. Since 0.14, computers can be marked as “Test PC” (“Тестовый ПК”): they get a new version right away, the rest after the number of days set in the panel (3 by default). The office server downloads the update itself and serves it to computers on the network, so PCs without internet access are updated too. The PC card has an “Inventory” section (“Инвентаризация”): Windows version, antivirus, date of the last Windows update and the list of installed programs; a summary for all PCs is under “Computers → Programs” (with CSV export). On Home, the “Monthly report” button (“Отчёт за месяц”) shows a summary for the manager: requests and response time, problem PCs, alerts, antivirus and updates; the report can be printed or saved as PDF.
Settings → Log (“Журнал”)Who did what: time, administrator, action, details. “Refresh” (“Обновить”) loads new entries.
Settings → Backups and server (“Копии и сервер”)Server backups and the “Server and employees” block: “Invite employees…”, “Move data…”, “Install server on Linux…” and “Update server” (shown when a Linux server is older than the version in the app). See “Office server” and “Server on Linux”.
Settings → For advanced users (“Для опытных”)Network devices — routers, printers, UPSs: “Find on network” or “+ Add”, status and events. Scripts — PowerShell or Bash on a group of PCs (as the Lanorix service, recorded in each PC’s log; for network settings, use templates with automatic rollback). Schedule — the same scripts on a schedule. Tools — ping, traceroute, a port scanner and host discovery, from this console or from an employee’s PC.

7. Subscription and cloud

Connecting to the cloud is optional: the built-in server works without it, and an internet connection is only needed occasionally to check the subscription (the license is remembered for 7 days, followed by a grace period). The “Subscription and cloud” button is at the bottom of the menu. Paste the cloud address (https://lanorix.su) and the server key from the company dashboard (it starts with npk_). After that, administrators sign in with the company account, and the subscription is checked against the cloud roughly every 6 hours. When the subscription is about to end, a banner with a button leading to these settings appears above the console. Details are in “Connecting the server to the cloud”.

8. Changing the server, signing out, uninstalling

  • Change the mode, server or group: on the administrator’s computer, use “Change mode…” (“Сменить режим…”) in the tray menu; employees use “Connection settings…”. Saved sign-in details are forgotten.
  • Sign out of the console: the “Sign out” button at the bottom of the menu.
  • Uninstall the app: Windows Settings → Apps → Lanorix → Uninstall. Settings remain in %APPDATA%\Lanorix (on the administrator’s computer, the built-in server data is also there, in the server folder); delete this folder only if you need to erase everything.
  • Updates: from version 0.13 updates arrive automatically: the app checks lanorix.su every 6 hours and installs only updates signed by Lanorix. Employee computers update on their own (the owner can turn automatic updates off for employee computers); on the administrator’s computer the update is installed with the “Install … and restart” button under Settings → Command protection → Updates. Versions older than 0.13 need one manual install: download the new installer from the website and install it over the current version.

9. If something does not work

  • “A secure wss:// server is required to sign in” (“Для входа нужен защищённый wss:// сервер”): enter a wss:// address or, for a server on the local network, check “Allow unencrypted connection on the local network only”.
  • An employee PC cannot find the server: check that the administrator’s computer is on and that Lanorix is allowed on private networks in Windows Firewall there. If the PC is on another subnet or on guest Wi-Fi, sign in via “Other options” with the address from the console or the tray menu (port 8787).
  • A PC does not appear in the computer list: click “Accept” on Home or on the “New computer” banner; for manual sign-in, check the group login and password; PCs connected from the internet wait for administrator approval; keep in mind the subscription’s device limit.
  • Everything else is in “Common problems and solutions”.